 |
 |
 |
|
STRONGBOND EPOXY WOOD FILLER is a two-component, rapid-curing, high-strength epoxy wood filler and multi-purpose repair adhesive. Its non-sag formula fills voids left by dry-rot, restoring strength and shape to damaged wood. The Filler creates a high-strength, chemical bond to STRONGBOND EPOXY WOOD SEALER, making repairs to dry-rotted wood last longer. This product also is an excellent multi-purpose adhesive. It will bond to most surfaces, such as brick, ceramic tile, concrete, fiberglass, or stone.
- 102 oz. Kit
- Kit contains 51 oz. Part A and 51 oz. Part B (for 1:1 mix ratio)
- Epoxy resin bonding for dry-rot repair. Fills voids left by dry-rot, nail holes, or missing wood
- Rapid initial 3-hour cure time at room temperature
- Non-sag, no-shrink formula makes it excellent for vertical and overhead applications
- Low VOC, low odor, and solvent-free
- Ideal for repairing wooden window frames and sills, rafter tails, exposed beams, decks, doors, floors, fences, boat hulls, and other wooden structural and decorative elements. The restored wood can be primed and painted with water-based paint or other epoxy-compatible topcoat
Case quantity: 1
Part
Number:
RREF 102 OZ
KM Code: 60412
The Technical Data Sheet describes the product and provides instructions on using it.
The Technical Data Sheet summarizes the product’s performance and other technical characteristics
Important information about using the product safely is included in the Safety Data Sheet.
|
|
|
 |
|
 |
|